#Swimming pool fence code windows#

The goal of pool safety barriers is to prevent unauthorized entry to the pool area in order to prevent drownings.

Pool safety barriers or exterior barriers are devices that prevent easy access to your pool that provide an extra layer of security. An approved means of protection, such as self-closing doors with self-latching devices, provided that the degree of protection afforded is not less than the protection afforded by Items 1 or 2.Are you entertaining building a pool or maybe just purchased one and looking to learn about the required barrier codes? This article will explain the safety barrier requirements for the areas with the most pool permits issued in Arizona during 2020.A safety cover that is listed and labeled in accordance with ASTM F 1346.In dwellings or structures required to be Accessible units, Type A units or Type B units, the deactivation switch shall be located not greater than 54 inches (1372 mm) and not less than 48 inches (1219 mm) above the threshold of the door. In dwellings or structures not required to be Accessible units, Type A units or Type B units, the deactivation switch shall be located 54 inches (1372 mm) or more above the threshold of the door. The alarm shall be listed and labeled as a water hazard entrance alarm in accordance with UL 2017. An alarm that produces an audible warning when the door or its screen or window, is opened.

#Swimming pool fence code windows#

Where a wall of a dwelling or structure serves as part of the barrier, doors and operable windows with a sill height of less than 48 inches (1219 mm) that provide direct access to the aquatic vessel through the wall, shall be equipped with one or more of the following:

Mesh fences shall not be used on top of on ground residential pools.

Patio deck sleeves such as vertical post receptacles which are placed inside the patio surface shall be of a nonconductive material.

Where a hinged gate is used with a mesh barrier, the gate shall comply with Section 305.3.

Common attachment devices include, but are not limited to, devices that provide the security equal to or greater than that of a hook-and-eye-type latch incorporating a spring-actuated retaining lever such as a safety gate hook.

An attachment device shall attach each barrier section at a height not lower than 45 inches (1143 mm) above grade.

The maximum vertical clearance from the bottom of the mesh fence and the solid surface shall not be more than 4 inches (102 mm) from grade or decking.

The fence shall be designed and constructed so that it does not allow passage of a 4-inch (102 mm) sphere under any mesh panel.

The maximum vertical clearance from the bottom of the mesh fence and the solid surface shall not permit the fence to be lifted more than 4 inches (102 mm) from grade or decking.

The bottom of the mesh restraining fence shall be not more than 1 inch (25 mm) above the deck or installed surface or grade.

Mesh fences, other than chain link fences in accordance with Section 305.2.7, shall be installed in accordance with the manufacturer's instructions and shall comply with the following: Where the barrier is mounted on the top of the vessel, the vertical clearance between the top of the vessel and the bottom of the barrier shall not exceed 4 inches (102 mm).

Where the top of the vessel structure is above grade, the barrier shall be installed on grade or shall be mounted on top of the vessel structure.

The vertical clearance between a surface below the barrier to a solid surface, such as concrete, and the bottom of the required barrier shall not exceed 4 inches (102 mm) where measured on the side of the required barrier that faces away from the vessel.

The vertical clearance between grade and the bottom of the barrier shall not exceed 2 inches (51 mm) for grade surfaces that are not solid, such as grass or gravel, where measured on the side of the barrier that faces away from the vessel.

Such height shall exist around the entire perimeter of the vessel and for a distance of 3 feet (914 mm) where measured horizontally from the required barrier. The top of the barrier shall be not less than 48 inches (1219 mm) above grade where measured on the side of the barrier that faces away from the aquatic vessel.Barrier heights and clearances shall be in accordance with all of the following: